us-cert

View CSAF 1. EXECUTIVE SUMMARY CVSS v4 8.7 ATTENTION: Exploitable remotely Vendor: Westermo Network Technologies Equipment: WeOS 5 Vulnerability: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') 2. RISK EVALUATION Successful exploitation of this vulnerability could allow an attacker with administrative permissions to execute commands that would typically be inaccessible. This could allow the execution of commands with privileges beyond those normally granted to the attacker. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Westermo reports following versions of WeOS 5, an industrial network operating system, are affected: WeOS 5: Versions 5.24 and later 3.2 VULNERABILITY OVERVIEW 3.2.1 IMPROPER NEAUTRALIZATION OF SPECIAL ELEMENTS USED IN AN OS COMMAND ('OS COMMAND INJECTION') CWE-78 Westermo has identified a vulnerability in WeOS 5 that could potentially be used to inject OS commands due to unsafe handling of media definitions. CVE-2025-46418 has bee...

View CSAF 1. EXECUTIVE SUMMARY CVSS v4 5.8 ATTENTION: Low Attack Complexity Vendor: Schneider Electric Equipment: Saitel DR RTU Vulnerabilities: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') 2. RISK EVALUATION Successful exploitation of these vulnerabilities could enable an attacker to execute arbitrary shell commands on the affected devices. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Schneider Electric reports that the following products are affected: Schneider Electric Saitel DR RTU: Versions 11.06.29 and prior Schneider Electric Saitel DP RTU: Versions 11.06.33 and prior 3.2 VULNERABILITY OVERVIEW 3.2.1 IMPROPER NEUTRALIZATION OF SPECIAL ELEMENTS USED IN AN OS COMMAND ('OS COMMAND INJECTION') CWE-78 An OS command injection vulnerability exists that could cause the execution of any shell command when executing a netstat command using BLMon Console in an SSH session. CVE-2025-9996 has been assigned to this vulnerability. A CVSS v3.1 base sc...

View CSAF 1. EXECUTIVE SUMMARY CVSS v4 9.3 ATTENTION: Exploitable remotely/Low attack complexity Vendor: Dover Fueling Solutions Equipment: ProGauge MagLink LX4, ProGauge MagLink LX4 Plus, ProGauge MagLink LX4 Ultimate Vulnerabilities: Integer Overflow or Wraparound, Use of Hard-coded Cryptographic Key, Use of Weak Credentials 2. RISK EVALUATION Successful exploitation of these vulnerabilities could result in a remote attacker causing a denial-of-service condition or gaining administrative access to the device. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS The following versions of ProGauge MagLink LX, a fuel and water tank monitor, are affected: ProGauge MagLink LX 4: Versions prior to 4.20.3 ProGauge MagLink LX Plus: Versions prior to 4.20.3 ProGauge MagLink LX Ultimate: Versions prior to 5.20.3 3.2 VULNERABILITY OVERVIEW 3.2.1 INTEGER OVERFLOW OR WRAPAROUND CWE-190 Affected devices fail to handle Unix time values beyond a certain point. An attacker can manually change the system time t...

View CSAF 1. EXECUTIVE SUMMARY CVSS v4 9.3 ATTENTION: Exploitable remotely/low attack complexity Vendor: Hitachi Energy Equipment: Service Suite Vulnerability: Deserialization of Untrusted Data 2. RISK EVALUATION Successful exploitation of this vulnerability could allow attackers to compromise Oracle WebLogic Server, resulting in potential impacts on confidentiality, integrity, and availability. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Hitachi Energy reports that the following products are affected: Service Suite: Versions prior to 9.6.0.4 EP4 3.2 VULNERABILITY OVERVIEW 3.2.1 DESERIALIZATION OF UNTRUSTED DATA CWE-502 Easily exploitable vulnerability allows unauthenticated attacker with network access via IIOP, T3 to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVE-2020-2883 has been assigned to this vulnerability. A CVSS v3.1 base score of 9.8 has been calculated; the CVSS vector string is (CVSS:3.1/AV:N...

As of January 10, 2023, CISA will no longer be updating ICS security advisories for Siemens product vulnerabilities beyond the initial advisory. For the most up-to-date information on vulnerabilities in this advisory, please see Siemens' ProductCERT Security Advisories (CERT Services | Services | Siemens Global). View CSAF 1. EXECUTIVE SUMMARY CVSS v3 7.5 ATTENTION: Exploitable remotely/low attack complexity Vendor: Siemens Equipment: SIMATIC NET CP, SINEMA and SCALANCE Vulnerabilities: Integer Overflow or Wraparound 2. RISK EVALUATION Successful exploitation of these vulnerabilities could allow an attacker to cause a denial-of-service (DoS) condition in the affected devices by exploiting integer overflow bugs. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Siemens reports that the following products are affected: Siemens RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2): < V7.1 Siemens SCALANCE M874-3 (6GK5874-3AA00-2AA2): < V7.1 Siemens SCALANCE M876-3 (EVDO) (6GK5876-3AA02-2BA2): < V7.1 ...

As of January 10, 2023, CISA will no longer be updating ICS security advisories for Siemens product vulnerabilities beyond the initial advisory. For the most up-to-date information on vulnerabilities in this advisory, please see Siemens' ProductCERT Security Advisories (CERT Services | Services | Siemens Global). View CSAF 1. EXECUTIVE SUMMARY CVSS v3 7.5 ATTENTION: Exploitable remotely/low attack complexity Vendor: Siemens Equipment: INDUSTRIAL EDGE, OpenPCS, RUGGEDCOM, SCALANCE, SIMATIC, SIMOTION, SINAUT, SINEC, SIPLUS, TIA Vulnerability: Loop with Unreachable Exit Condition ('Infinite Loop') 2. RISK EVALUATION Successful exploitation of this vulnerability could allow an attacker to create a denial-of-service condition. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Siemens reports that the following products are affected: Siemens Industrial Edge - OPC UA Connector: All versions prior to V1.7 Siemens RUGGEDCOM ROX MX5000RE: All versions prior to V2.15.1 Siemens SCALANCE W788-2 RJ45 (6GK5...

View CSAF 1. EXECUTIVE SUMMARY CVSS v4 5.3 ATTENTION: Exploitable remotely/low attack complexity Vendor: Schneider Electric Equipment: Altivar products, ATVdPAC module, ILC992 InterLink Converter Vulnerability: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') 2. RISK EVALUATION Successful exploitation of this vulnerability could allow an attacker to read or modify data. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Schneider Electric reports that the following products are affected: Schneider Electric ATVdPAC module: Versions prior to 25.0 Schneider Electric Altivar Process Drives ATV930: All versions Schneider Electric Altivar Process Drives ATV950: All versions Schneider Electric Altivar Process Drives ATV955: All versions Schneider Electric Altivar Process Drives ATV960: All versions Schneider Electric Altivar Process Drives ATV980: All versions Schneider Electric Altivar Process Drives ATV9A0: All versions Schneider Electric Altivar Process Drives A...

As of January 10, 2023, CISA will no longer be updating ICS security advisories for Siemens product vulnerabilities beyond the initial advisory. For the most up-to-date information on vulnerabilities in this advisory, please see Siemens' ProductCERT Security Advisories (CERT Services | Services | Siemens Global). View CSAF 1. EXECUTIVE SUMMARY CVSS v3 7.4 ATTENTION: Exploitable remotely Vendor: Siemens Equipment: INDUSTRIAL EDGE, RUGGEDCOM, SCALANCE, SIMATIC, SINEC, SINEMA, SINUMERIK, SIPLUS, TIA Vulnerability: Out-of-bounds Read 2. RISK EVALUATION Successful exploitation of these vulnerabilities could allow an unauthenticated remote attacker to execute arbitrary code or to cause a denial-of-service condition. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Siemens reports that the following products are affected: Siemens Industrial Edge - Machine Insight App: All versions Siemens RUGGEDCOM ROX RX1510: All versions prior to V2.15.0 Siemens SCALANCE X201-3P IRT PRO (6GK5201-3JR00-2BA6): All ...

View CSAF 1. EXECUTIVE SUMMARY CVSS v4 10.0 ATTENTION: Exploitable remotely/low attack complexity Vendor: Delta Electronics Equipment: DIALink Vulnerabilities: Path Traversal 2. RISK EVALUATION Successful exploitation of these vulnerabilities could allow an attacker to bypass authentication. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS The following versions of Delta Electronics DIALink are affected: DIALink: Versions V1.6.0.0 and prior 3.2 VULNERABILITY OVERVIEW 3.2.1 IMPROPER LIMITATION OF A PATHNAME TO A RESTRICTED DIRECTORY ('PATH TRAVERSAL') CWE-22 Delta Electronics DIALink has an Improper Limitation of a Pathname to a Restricted Directory vulnerability which could allow an attacker to bypass authentication. CVE-2025-58320 has been assigned to this vulnerability. A CVSS v3.1 base score of 7.3 has been calculated; the CVSS vector string is (AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L). A CVSS v4 score has also been calculated for CVE-2025-58320. A base score of 6.9 has been calculated; the C...

As of January 10, 2023, CISA will no longer be updating ICS security advisories for Siemens product vulnerabilities beyond the initial advisory. For the most up-to-date information on vulnerabilities in this advisory, please see Siemens' ProductCERT Security Advisories (CERT Services | Services | Siemens Global). View CSAF 1. EXECUTIVE SUMMARY CVSS v3 9.8 ATTENTION: Exploitable remotely/low attack complexity Vendor: Siemens Equipment: RUGGEDCOM, SINEC NMS, and SINEMA Vulnerabilities: NULL Pointer Dereference, Out-of-bounds Write, Server-Side Request Forgery (SSRF) 2. RISK EVALUATION Successful exploitation of these vulnerabilities could allow an attacker to cause a denial-of-service, crash the product, or perform remote code execution. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Siemens reports that the following products are affected: Siemens RUGGEDCOM NMS: All versions when using the device firmware upgrade mechanism (CVE-2021-34798) Siemens SINEC NMS: < V1.0.3 Siemens SINEMA Remote C...